HP dc5100 ethernet problem

October 22, 2012, 8:36 am

≫ Next: works2000 install problem

≪ Previous: How do I get rid of Windows 'Preparing To Install'

I've been using an hp

dc5100 sff for several years. It came with XP pro and works great so I bought a second one as a backup. The only difference was that the second one did not have an OS. I installed my personal legal copy of XP pro and I now am unable to connect to the interent. I see there is no ethernet controller according to the device manager. Tried installng drivers from the HP site that I download on my GOOD computer and put them on a CD.............no help. What next...Help??
Bob

↧

works2000 install problem

October 22, 2012, 9:05 am

≫ Next: Solved: Slow pc

≪ Previous: HP dc5100 ethernet problem

windows xp 2000 dell dimension 3100.installing works2000 and works 2005 get this message :setup is unable to register tasks

↧

Solved: Slow pc

October 19, 2012, 5:35 pm

≫ Next: Solved: works2000 install problem

≪ Previous: works2000 install problem

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: AMD Sempron(tm) 3000+, x86 Family 6 Model 10 Stepping 0
Processor Count: 1
RAM: 959 Mb
Graphics Card: VIA/S3G UniChrome IGP, 64 Mb
Hard Drives: C: Total - 33584 MB, Free - 9032 MB; D: Total - 4561 MB, Free - 354 MB;
Motherboard: ASUSTek Computer INC., Kelut
Antivirus: AVG Anti-Virus Free Edition 2012, Updated: Yes, On-Demand Scanner: Enabled

Guys,

My computer is slow so I ran a free system scan from SpeedyPC PRO and there were 1000 problems found are they for real?

I have done all I know to do:

RAN: %temp% - c:\windows\temp - msconfig and found extra programs running at START UP.
Temp File cleaner by Old Timer DISK CLEANER by MS to get rid of compress files.

I shut down the PC for 10 minutes and nothing after rebooting.

Do I just need a new PC?

Thanks.
:cool:

↧

Solved: works2000 install problem

October 22, 2012, 9:05 am

≫ Next: Windows XP Professional SP2 starting & booting problems

≪ Previous: Solved: Slow pc

windows xp 2000 dell dimension 3100.installing works2000 and works 2005 get this message :setup is unable to register tasks

↧

Windows XP Professional SP2 starting & booting problems

October 22, 2012, 1:22 pm

≫ Next: Java issues

≪ Previous: Solved: works2000 install problem

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Professional, Service Pack 2, 32 bit
Processor: AMD A4-3400 APU with Radeon(tm) HD Graphics, x86 Family 18 Model 1 Stepping 0
Processor Count: 2
RAM: 3067 Mb
Graphics Card: AMD Radeon HD 6410D, 1024 Mb
Hard Drives: C: Total - 49999 MB, Free - 38168 MB; D: Total - 99998 MB, Free - 86176 MB; E: Total - 99998 MB, Free - 95692 MB; F: Total - 226933 MB, Free - 213795 MB;
Motherboard: ASUSTeK Computer INC., F1A55-M LX PLUS
Antivirus: AVG Anti-Virus Free Edition 2012, Updated: Yes, On-Demand Scanner: Enabled

System Information as per DirectX Diagnostic Tool
------------------
System Information
------------------
Time of this report: 10/23/2012, 00:09:32
Machine name: ASUS
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_rtm.040803-2158)
Language: English (Regional Setting: English)
System Manufacturer: System manufacturer
System Model: System Product Name
BIOS: BIOS Date: 08/30/11 11:27:23 Ver: 04.06.04
Processor: AMD A4-3400 APU with Radeon(tm) HD 6410D Graphics, MMX, 3DNow (2 CPUs), ~2.7GHz
Memory: 3068MB RAM
Page File: 659MB used, 5315MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.2180 32bit Unicode

Problem:
Many times on starting the PC or on booting, the computer displays a screen:
Start Safe Mode
Start Normally
Start Last working configuration.

About 6 times, I have gone through the rigmarole of reinstalling the whole system, but after sometime the above happens all over again.

I usually use the Safe Mode, then shutdown, and attempt restart. Seems some problem with pagefile.

I have AVG Free 2012 and Malwarebytes Anti-Malware 1.65.1.1000 that runs in manual mode. Though IE6 came preloaded, I prefer to use FireFox in autoupdate mode, currently version 16.0.1. Java update is enabled, currently, Java 7 Update 9. However, Windows Update is disabled. I use Piriformis CCleaner and Defragler regularly. Once PC is running I have no problems whatsoever.

This is an assembled PC used for medical transcription. This x86 machine running Windows XP Professional Version 2002 Service Pack 2.

Would the Windows XP Repair Mode be of any help? Please help. If there is anything else u need, I would be glad to provide.

↧

Java issues

October 22, 2012, 2:22 pm

≫ Next: Mouse hassle.

≪ Previous: Windows XP Professional SP2 starting & booting problems

i have a corrupt java file and add or remove program wont let me delete it .and jave will not install with it in system.

↧

Mouse hassle.

October 22, 2012, 4:16 pm

≫ Next: My Computer and Printer Not Communicating

≪ Previous: Java issues

My right click is not responding.
Right Click = open, open in new window, copy, cut paste etc. > NOT RESPONDING. (left click is fine)

Replacing mouse does not fix problem.

↧

My Computer and Printer Not Communicating

October 22, 2012, 4:20 pm

≫ Next: Creating XP Pro Bootable ISO disc

≪ Previous: Mouse hassle.

I am on a network with two other computers and a printer. All three computers were in communication with the printer then I ran out of black ink and changed the cartridge. Now my computer gets the message that my computer and printer are not communicating. The other two computers both communicate and print. I tried running the software cd on my computer and still no communication.

↧

Creating XP Pro Bootable ISO disc

October 22, 2012, 5:21 pm

≫ Next: Windows XP Hangs at MUP.SYS with one Exception

≪ Previous: My Computer and Printer Not Communicating

Hey all! Thanks for any help here, I am working on finishing my associates degree in computer support and this damn XP ISO disc is makin me wanna make this pc a boat anchor, but I'm trying to stay patient. Ok, so I have access to my DreamSpark.com account and have downloaded the XP Pro SP2 and have burnt it to disc many times using a variety of burners, from nLite to Active ISO burner and even the built-in ISO software that was pre-loaded on my working machine. I can verify that the discs have burnt correctly because whenever I load them into working machines the setup.exe file wants to begin the process. The machine I'm trying to send the ISO image to is stuck in an infinite restart loop. I've verified through BIOS that both the CD drive and HD are being recognized so I know they exist. I was thinking that there was something special that I had to do to create an XP ISO file, but that information has already been erased from my brain. Thanks for any help!

↧

Windows XP Hangs at MUP.SYS with one Exception

October 23, 2012, 12:22 am

≫ Next: Port Fowarding

≪ Previous: Creating XP Pro Bootable ISO disc

My Windows XP Desktop was operating a little slower then usual, so I rebooted it with the Shutdown:Restart windows command. It will now only boot up to mup.sys and hangs.

I was troubleshooting and thought I would try to eliminate the mouse and keyboard as a possible cause.

I unplugged USB mouse and keyboard (This PC only has USB connections for mouse and keyboard) and rebooted the PC. The PC booted up correctly. So I got my mini laptop and tried a remote connection. The PC works perfectly as a host for a Remote Desktop as long as the PC and Mouse are unplugged.

I have tested the keyboard and mouse on another PC and they both work fine.

Any ideas of what might be corrupted to cause this problem.

↧

Port Fowarding

October 23, 2012, 1:19 am

≫ Next: need help with installing windows

≪ Previous: Windows XP Hangs at MUP.SYS with one Exception

Hi I'm making a minecraft server and I need to port forward and I get something like this on the help:

Using the Port Forwarding page, you can provide local services (for example web hosting) for people on the Internet or play Internet games. To configure a service, game or other application select the external connection (for example the Internet connection), select the computer hosting the service and add the corresponding firewall rule. If you want to add a custom application, select the User category, click New and fill in the port, protocols and description for your application. You can also add/edit/delete rules without using the pre-defined Firewall Policy Database (games, services, etc.). Click on "Custom Rules" to access this type of interface. In the presence of the firewall, anonymous Internet traffic is blocked.

I don't understand computer language so can you please reply simply.

Thanks

↧

need help with installing windows

October 23, 2012, 4:27 am

≫ Next: Frozen System

≪ Previous: Port Fowarding

hi guys
i am new here and i work as mobile repairing and unlocking. so i want to now which is best window for me between 32bit and 64bit for unlocking softwares and drivers. i have windows 32 bit but its to slow and some time tak 5 min to install drivers and detect mobile.
so i want some experts opinion which window i use to get better porformance in my work.

thnx

my system configuration is
pentium(R) dual-core cpu E6500 @ 2.93Ghz, 4gb ram

↧

Frozen System

October 23, 2012, 5:36 am

≫ Next: Cannot Set "Optimize for quick removal"

≪ Previous: need help with installing windows

I really dont know what the problem is. I have a Dell Inspiron 1300 with Windows XP Home Edition SP2. I re-installed the Windows about 3 weeks back and at first everything seemed to work well. However over the last week I have practically been unable to use the laptop because it is so slow. It is slow to respond. Sometimes the browsers crash. Even applications like Microsoft word take forever to respond.
Quite honestly I am at my wits end! :confused: and I would really appreciate help with this...Thanks!

here is the SysInfo

Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Home Edition, Service Pack 2, 32 bit
Processor: Intel(R) Celeron(R) M processor 1.50GHz, x86 Family 6 Model 13 Stepping 8
Processor Count: 1
RAM: 1271 Mb
Graphics Card: Mobile Intel(R) 915GM/GMS,910GML Express Chipset Family, 96 Mb
Hard Drives: C: Total - 34985 MB, Free - 16507 MB;
Motherboard: Dell Inc., 0GD366
Antivirus: avast! Antivirus, Updated: Yes, On-Demand Scanner: Enabled

↧

Cannot Set "Optimize for quick removal"

October 23, 2012, 6:29 am

≫ Next: Solved: Trouble starting windows XP

≪ Previous: Frozen System

I have a Seagate 500MB external HD on which I would like set "Optimize for quick removal" but this choice is greyed out under "Policies". I am using our Administrator account. How can I access this choice?

↧

Solved: Trouble starting windows XP

October 23, 2012, 11:21 am

≫ Next: Can not login to windows xp

≪ Previous: Cannot Set "Optimize for quick removal"

Starts at safe start page tried to open windows in last good start up then safe mode goes to start windows after a few seconds returns to safe mode page. Any thoughts

↧

Can not login to windows xp

October 23, 2012, 1:48 pm

≫ Next: Solved: RoxWatchTray13.exe...Application unable to start correctly. Click OK to close

≪ Previous: Solved: Trouble starting windows XP

it is a personal computer window xp dell and i was changing the users, original password was password and original user was myself. i was changing the domain and accidently left it in workgroup instead of domain before i restarted it, now it won"t accept the original password, new or old user (me) or guest. I even tried the administrator option i saw in your previous posting, the other guys posting and that doesn"t help either. Any suggestions? Greatly appreciated, Thanks Antonio

↧

Solved: RoxWatchTray13.exe...Application unable to start correctly. Click OK to close

October 21, 2012, 11:05 am

≫ Next: Solved: double clicking wont open desktop shortcuts

≪ Previous: Can not login to windows xp

I'm running Windows 7 OS x 64 bit on an Dell XPS. Whenever I switch from the administrator user to a non-administrator user, Explorer posts an error message that states: "RoxWatchTray13.exe. Oxc0000022. Application unable to start correctly. Click OK to close application." Clicking OK removes the error message and allows the non-administrator user to proceed. However, I'd like to get rid of that annoying message. Any suggestions would be appreciated.

↧

Solved: double clicking wont open desktop shortcuts

October 21, 2012, 3:55 pm

≫ Next: Solved: Windows XP Professional SP2 starting & booting problems

≪ Previous: Solved: RoxWatchTray13.exe...Application unable to start correctly. Click OK to close

but it seems to work fine for everything else. and when i try rightclicking to open things it doesnt give me the open option. this just started happening randomly and i have checked mouse settings but nothing seems off there.

↧